![PADS输出坐标文件[适配嘉立创贴片]](/0.jpg)
PADS输出坐标文件
1.打开导出坐标文件的选项：
2.配置导出设置，这里最后做的是excel的文件，顶层配置如下做图，底层配置如下右图：
3.各自点击运行后提示如下左图，到相应的目录看到的文件如下右图：
4.把生成的".BP"格式的文件改成“.xls”格式即可，最后修改如下：
5.《DYNPROSB.xls》和《DYNPROST.xls》文件的大体内容如下：
这两个确实就是坐标文件，把这两个文件拷贝走就可以了！
适配嘉立创贴片
上面生成的坐标文件不能够适配嘉立创的贴片下单平台,会报这样的错误:
生成的坐标文件如下:
这里修改如下PADS的脚本如下:
主要是修改列的名称和增加上mm的单位
修改后的脚本如下:
' Sample 17: Excel Part List Report.BAS
'
'This is a completely revised version of the same file renamed to: old_X-Y Part Location Report.bas
'This script has been generated by PowerPCB's VB Script Wizard on 8/23/2007 3:19:25 PM
'It will create reports in Microsoft Excel Format.
'You can use the following code as a skeleton for your own VB scripts
'Array of column names. You can modify it to rename columns
Const Columns = Array("PartType", "RefDes", "Footprint", "Pins", "Layer", "Rotation", "Mid X", "Mid Y", "SMD", "Glued")
Sub Main
tempFile = DefaultFilePath & "\temp.txt"
Open tempFile For Output As #1
'Output table header
For i = 0 to UBound(Columns)
OutCell Columns(i)
Next
Print #1
'Output table rows
For Each part in ActiveDocument.Components
OutCell part.PartType
OutCell part.Name
OutCell part.Decal
OutCell part.Pins.Count
OutCell ActiveDocument.LayerName(part.layer)
OutCell part.orientation
OutCell Format(part.PositionX, "0.000mm")
OutCell Format(part.PositionY, "0.000mm")
OutCell Format(part.IsSMD, "Yes/No")
OutCell Format(part.Glued, "Yes/No")
Print #1
Next part
Close #1
ExportToExcel
End Sub
Sub ExportToExcel
FillClipboard
Dim xl As Object
On Error Resume Next
Set xl = GetObject(,"Excel.Application")
On Error GoTo ExcelError ' Enable error trapping.
If xl Is Nothing Then
Set xl = CreateObject("Excel.Application")
End If
xl.Visible = True
xl.Workbooks.Add
xl.Range("A:C").NumberFormat = "@"
xl.Range("D1:J1").NumberFormat = "@"
xl.ActiveSheet.Paste
xl.Range("A1:J1").Font.Bold = True
xl.Range("A1:J1").NumberFormat = "@"
xl.ActiveSheet.UsedRange.Columns.AutoFit
xl.Range("A1").Select
On Error GoTo 0 ' Disable error trapping.
Exit Sub
ExcelError:
MsgBox Err.Description, vbExclamation, "Error Running Excel"
On Error GoTo 0 ' Disable error trapping.
Exit Sub
End Sub
Sub OutCell (txt As String)
Print #1, txt; vbTab;
End Sub
Sub FillClipboard
' Load whole file to string variable
tempFile = DefaultFilePath & "\temp.txt"
Open tempFile For Input As #1
L = LOF(1)
AllData$ = Input$(L,1)
Close #1
'Copy whole data to clipboard
Clipboard AllData$
Kill tempFile
End Sub
这时候生成的坐标格式如下:
这时候就可以被嘉立创下单平台识别了!
嘉立创下单的时候选择这个模式:
本文摘录于：【教程】PADS如何导出SMT贴片机用的坐标文件 - 立创社区 (szlcsc.com)只是做学习备份之用，绝无抄袭之意，有疑惑请联系本人！